Editing The Channel List - Medion MD 29292 Handbuch

Editing the channel list

The channel list of the receiver can be sorted according to your wishes. For models with
satellite reception we recommend that the channels are grouped to satellite positions, as is
the case in the pre-programmed lists.
Call up the channel list editor through the menu heading "Channel List" / "Sort Channels"
in the main menu.
After making the desired changes leave the channel list with the EXIT button. Confirm in the
follow up "Save Changes" window by pressing OK.
To change entries the required entry should be chosen by pressing OK. A menu will appear
with the available functions.
If you wish to edit a complete block of channels in a row choose the option "Block". In this
case the menu disappears and you will be requested to mark the end of the block in the
list. Go to the last entry belonging to the block and press OK. The menu with the available
options will then reappear.
Following functions are available in the menu:
Copy
Move
Delete
Cut
Insert empty
54
Copies the channel on another position in the channel list. The
target entry is over written.
Moves the entry to another position.
Note: If an entry is moved upwards, it will be positioned before the
destination position, if moved downwards it will be placed behind
the destination position.
If a channel is deleted from the list, the position will be marked as
unused, thus making no changes to the number sequence of the
channel list.
Deletes a channel from the list but slips the following channels
back down the list.
Note: To support the block function of the list, only those channels
are moved up that are located before the next entry that is marked
as "unused". If the list is for example unused from entry 85 to 99
you could delete entry 57 and move only the channels 57 to 84
back down the list. The channels past 100 would remain un-
changed.
Inserts an empty entry. The entries there behind are moved then
accordingly backwards.
Note: As with the "Cut" function the areas marked as unused chan-
nels will be regarded as the end of a block.