Duravit Blue Moon 760143 Montageanleitung Seite 16

Electrical installation
Power supply
Circuit breaker
RCCB
Pre-installation
> Installing a permanent power supply line:
• Install separate circuit breaker and residual­current
circuit breaker (RCCB) upstream
• Connect all pole disconnector mains switch upstream
located outside specified protection zones (0 ­ 2)
• Leave 3000 mm of feed cable exposed
> Laying an equipotential bonding cable:
• Leave 3000 mm of cable exposed
16
connecting the whirltub (Diagram 16)
Malfunctions due to incorrect
noticE
installation!
> Do not fasten the cables together with cable ties.
> Do not install the supply line parallel to the control
cables.
i
Connect the supply line to the mains supply socket.
ii
Connect the potential equalisation cable to the
whirltub.
76xxxx xx x xx xx00: 50 Hz, 220 ­ 240 V AC
76xxxx xx x xx xx06: 60 Hz, 220 ­ 240 V AC
I = 16 A
N
I ≤ 30 mA
ΔN
Safety areas in accordance with DIN VDE 0100­701
0
6 0
1
0
i
L
N
PE
ii
6 0
0
* or the height
2
of the highest
shower head /
water outlet that
is permanently
installed,
depending on
which is higher
WH_M_BlueMoon_built­in/15.11.1
7