Reset (Reset Key) And External Reset Input; (Reset Key) And External Reset Input - Sony LY51 Bedienungsanleitung

6-1.

(Reset Key) and External Reset Input

RESET
Display
During initial Ends the initial setting mode and starts the measurement mode.
setting mode
During
Sets the current value to "0".
measurement
Clears both maximum and minimum values and restarts the
mode
measurement mode.
When waiting for a zero point, the wait status is canceled.
When an error Cancels the error message and returns to the measurement mode.
message is If the zero point reference mode was executed before the error
displayed
occurred,
("Error" and As a result, the reference point position is also canceled. The point at
"r.Error")
which
If the unit was being used in the zero point reference mode, you have
to reload the position of the reference point once more.
Clears the maximum and minimum values and restarts the operation.
During zero Cancels the zero point wait status and the zero point reference mode.
point wait To restart the zero point reference mode, load the zero point once
status and more.
zero point
reference mode
During function When
setting mode the setting operations are canceled and the unit returns to the mode
before the setting operation. (This is the same when
while inputting the initial setting items.)
164
Operation performed
will cancel the zero point reference mode.
RESET
was pressed will be set as a reference point.
RESET
is pressed part-way through the various function settings,
RESET
Operating procedure
Page 169: 7-1-1.
Ending the
initial settings
Page 169: 7-1-2.
Resetting the
current value
Page 170: 7-1-3.
Resetting the
error display
Page 175: 7-2-7.
Canceling the
zero point
reference mode
is pressed
RESET
Related sections
Normal measurement
and zero point
reference mode
measurement
→ Page 162: 5-2.
Zero Point
Reference Function
Error messages
→ Page 186: 8.
ALARM DISPLAY/
OUTPUT
Loading the zero
point
→ Page 172: 7-2-2.
Zero point load
Temporary stop and
canceling of the zero
point reference mode
→ Page 162: 5-2.
Zero Point
Reference Function