Herunterladen Diese Seite drucken

Hitachi ABB RVT Installation Und Betriebsanleitung Seite 563

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 161
4.3.
Framing layer & Command layer
The data can be accessed by different means:
– TCP/IP connection from a local client or from a remote client
– USB seen as a USB UART interface
The server will allow local and distant access to the RVT. Different access levels will be implemented to restrict certain
functionality to given users. A login and password will therefore be required.
The format of the messages transferred via those two medium will be the same.
Two layers will be put on top of them:
Framing Layer
Command Layer
STATUS
Approved
This layer is taking care of receiving the frames. The byte stream is decoded
and frames generated are passed to the layers above.
This is the upper layer taking care of the commands.
It will also take care of the authentication of the client during the connection via
some specific commands.
SECURITY LEVEL
Public
DOCUMENT ID
9AKK106713A9758
RVT CO MM UNI CATI O N
REV.
LANG.
PAGE
K
en
21/71
© 2022 Hitachi Energy. All rights reserved.

Werbung

loading