BRAYER BR4884 Bedienungsanleitung Seite 12

12 EN
temperature drops 1
the appliance will turn on and resume heating the
room;
- setting the temperature is not possible in Frost
Protection mode.
SELECTING DEFAULT OPERATING MODES
• When the appliance is turned on, by touching the
button (12) «РЕЖИМ» on the control panel (3) or
pressing the button (28) «РЕЖИМ» on the remote
control (22), select an appliance operation mode «PI,
P2, P3, P4, P5, UP».
• Operating modes «P1, P2, P3, P4, P5» are set by
default.
• Operating mode «UP» is a customized setting for
the room heating program, the description of the
program setting is described below.
THE TABLE BELOW SHOWS THE FACTORY
DEFAULT PROGRAM P1, P2, P3, P4, P5.
С below the set temperature,
0
Notes:
- Frost Protection function is activated when the
room temperature is below +5
room temperature at +5ºC, preventing the water
pipes from freezing.
- to achieve a comfortable temperature, you can set
the power and temperature of room heating.
С, and will keep the
0