Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
Cut out worktop to supplied dimensions shown (fig 1) with suitable equipment.
Seal the cut edge of the worktop using silicone or PTFE and allow to dry prior to
fitting the hob.
Stretch out the supplied seal along the underside edge of the hob ensuring the
ends overlap.
Do not use adhesives to fix the hob into the worktop. Once the seal is fitted
pisition the hob inot the cutour in the worktop. Apply gentle downward
pressure.
EN
53
Werbung
