Chauvet DJ GIGBAR MOVE + ILS Kurzanleitung Seite 6

EN
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Activates a menu option or selected value
Wireless Footswitch
The included wireless footswitch provides quick access to preset colors, color-change programs, and sound-activation
through the GigBAR MOVE + ILS microphone.
To use the footswitch:
1 2 3
GigBAR RF Remote Control
The GigBAR MOVE + ILS can be operated with the GigBAR RF Remote. To enable RF wireless control, follow the
instructions below.
5
QUICK REFERENCE GUIDE
1. Connect the GigBAR MOVE + ILS to power. Turn the wireless footswitch on.
4
2. Press <MENU> on the GigBAR MOVE + ILS until SETUP shows on the display,
and press <ENTER>.
3. Use <UP> or <DOWN> to select FOOT then press <ENTER>.
4. Use <UP> or <DOWN> to select COMMON (to use the GigBAR MOVE + ILS with
any footswitch) or BIND (to pair a footswitch to a specific GigBAR MOVE + ILS
fixture).
5. Press <ENTER>.
6. Use the chart below to activate the desired function.
1. Press <MENU> to view the main menu on the display.
2. Use <UP> or <DOWN> until SETUP is selected.
3. Press <ENTER>.
4. Use <UP> or <DOWN> until RF is selected.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to select COMMON (to connect a GigBAR MOVE + ILS
to any RF remote) or BIND (to pair an RF remote to a specific
GigBAR MOVE + ILS fixture).
7. Press <ENTER>.
GigBAR MOVE + ILS QRG Rev. 2