Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OBJ_BUCH-1168-001.book Page 45 Friday, April 16, 2010 5:25 PM
Ceiling Strips/Mouldings (According to US Standard)
52°
When the ceiling strips/mouldings are to be sawn lying flat on the saw table, the
standard mitre angles of 31.6° (horizontal) and 33.9° (vertical) must be set.
38°
The following table contains instructions for sawing ceiling strips/mouldings.
Settings
Vertical bevel angle
Ceiling strip/moulding
Inner corner Horizontal mitre
angle
Positioning of
workpiece
The finished
workpiece is lo-
cated...
Outer
Horizontal mitre
corner
angle
Positioning of
workpiece
The finished
workpiece is lo-
cated...
Bosch Power Tools
Placed
against
the fence
52°
0°
Left side
Right side
45° right
45° left
Bottom edge
Bottom edge
against the
against the
fence
fence
... to the right
... to the left of
of the cut
the cut
45° left
45° right
Bottom edge
Bottom edge
against the
against the
fence
fence
... to the right
... to the left of
of the cut
the cut
English | 45
Lying flat
on the saw
table
33,9°
Left side
Right side
31.6° right
31.6° left
Upper edge
Bottom edge
against the
against the
fence
fence
... to the left of
... to the left of
the cut
the cut
31.6° left
31.6° right
Bottom edge
Upper edge
against the
against the
fence
fence
... to the right
... to the right
of the cut
of the cut
1 609 929 W28 | (16/4/10)
Werbung
