Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Burner
Auxiliary burner
Semi-rapid burner
Rapid burner
Triple ring wok burner
⌀ 145 mm Ceramic burner
Flexible area
To identify the type of burner, refer to the designs in the section entitled, "Burner
and Nozzle Specifications".
Flame selection
As the burners are adjusted correctly, the flame should be light blue, and the inner
flame should be clear. The size of flame depends on the position of the related
control knob.
Burner ON, large flame
The burner must be set at a large flame during the initial phase of cooking, which
makes food boil quickly. Then should turn knob to the saving flame position to
maintain the cooking. It is possible to adjust the flame size stepless.
It is prohibited to adjust the flame between the Burner OFF and Burner ON large
flame positions.
High quantity of energy can be conserved if the hob is used correctly, parameters
are designed correctly, and appropriate cookware is used. The energy
conservation be as follows:
•
Up to 60% are conserved when proper pots are used,
•
Up to 60% are conserved when the unit is operated correctly and the suitable
flame size is chosen.
It is a prerequisite for efficient and energy-saving operation of hob that the
burners are kept clean at all times (in particular the flame slots and nozzles).
⌀ Cookware diameter (cm)
Burner ON, small flame
10-14
16-20
22-24
24-26
16.5
10-20 x 25-400
Burner OFF
EN
51
Werbung
