Burris FastFire C Benutzerhandbuch Seite 6

OPERATING INSTRUCTIONS
For op9mum performance and to prevent damage to this precision
instrument, carefully follow all instruc9ons.
CAUTIONS AND WARNINGS
Use proper firearms safety. Make sure the firearm is unloaded before
moun9ng the op9c.
KEY FEATURE:
BURRIS INTELLIGENT AUTO BRIGHT
The integrated control circuit adjusts the brightness of the aiming dot
according to surrounding light levels. The brightness sensor dectects the
light level in the direc9on of the target and modifies the intensity of the dot
accordingly so that it is not overpowering in low light while remaining highly
visible in bright daylight. When holstered, or stored, the op9c goes into an
ultra-low brightness sesng, saving the baXery for when you need it!
Bringing your firearm up to ready, instantly brings the dot back to the
op9mal level! Be careful not to obstruct the sensor. Clean if necessary. If you
wish to check its func9on, cover the sensor.
BATTERY INSTALLATION
The FastFire C operates with one
Lithium CR2032 baXery.
The baXery is installed on the boXom
of the op9c with the posi9ve (+) side
facing down and must be installed
with the op9c removed from firearm.
The baXery is secured into place when
the op9c is mounted. Screws should
be torqued to 9in-lbs.
6 | FASTFIRE C USER MANUAL