Assembly; Attaching The Handle - Holzmann RWH125ALU Originalbetriebsanleitung

12

ASSEMBLY

12.1

Attaching the Handle

Loosen the locking screw so far that the lower pipe rod can be completely used in the

lifting unit.
Pay attention that the 4-pin edge snaps into the lift unit in the 4-edge recess of the tubular
rod
 Tighten the set screw in the pipe groove again firmly so that the pipe rod can be rotated.
INFO: By the rotation of the tube rod, the hydraulic valve is opened and closed to the cylinder.
 The upper tube rod on the lower tube rod lock as shown.
HOLZMANN Maschinen Austria  www.holzmann-maschinen.at
4-edge recess in
tube rack
pipe groove
4-edge Pins in
Lifting unit
Rangierwagenheber / Service jack RWH125ALU - RWH180ALU - RWH250ALU
ASSEMBLY
Fixing screw
Seite 23