Adjust The Wattage In Vt Mode - INNOCIGS CUBOID Bedienungsanleitung

INNOCIGS CUBOID MINI BATTERY – OPERATING & CHANGING THE MODES

3. Adjust the Wattage in VT Mode

You can set the maximum power output in VT mode. Press the fire button 3 times to enter the
menu. Press the left button, so that the second line flashes. Then press the right button to adjust the
wattage. Confirm this by pressing the fire button.
Note
a) The VT mode supports a maximum resistance of 1.5 ohms. The device automatically switches to the
VW mode when the resistance is more than 1.5 ohms.
b) When using coils with Kanthal winding, the unit will change to VW mode after two seconds.
45