Herunterladen Diese Seite drucken

Greencut GS6800 Betriebsanleitung Seite 61

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 79
All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine.
Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in
this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.
USERS
This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.
PERSONAL SECURITY
Do not force this machine. Use this machine, accessories, tools, etc. in accordance with these instructions taking
into account the conditions and work to be performed. Using this machine for other than its intended purpose
may cause a hazardous situation.
Be alert, watch what you are doing when operating this machine.
Do not use this machine when you are tired or under the influence of drugs, alcohol, or medication.
Avoid inhalation of exhaust gases. This machine produces dangerous gases such as carbon monoxide that can
cause dizziness, fainting or death.
Check that all safety features are installed and in good condition. Do not use this machine if any of its components
are damaged.
Always maintain proper foot support and operate the machine only when it is on a fixed, stable, level surface.
Sliding or unstable surfaces can cause a loss of balance or control of the machine.
Always hold the machine by the handles with both hands.
When operating from heights, never work on a ladder, tree, or unsafe support and never operate with one hand.
Keep all body parts away from cutting elements and moving parts when the machine is running. Before starting
the machine, make sure that the cutting element is not in contact with any objects. A moment of carelessness
during operation may cause your clothing or body part to be cut by the cutting element.
Always hold the saw with your right hand on the rear handle and your left hand on the front handle. Holding the
saw with your hands upside down increases the risk of an accident and should never be done.
Check the condition of the tree to prevent dry branches from falling on it while you cut. When cutting a branch
that is under tension, be alert to the risk of elastic return. When the tension of the wood fibres is released, the
branch, under a spring effect, can hit the operator and/or project the saw out of control.
Use extreme caution when cutting weeds and young shrubs. Fine materials can trap the saw chain and be
projected onto you, or cause you to lose your balance under the effect of traction.
If you are an inexperienced user we recommend that you do a minimal amount of practice cutting logs on a
sawhorse or sawing fork.
Do not attempt to remove the cut material from the cutting tool when it is moving. Make sure that the machine
is switched off when cleaning up debris.
Never pick up the machine by the cutting tool. Cutting tools have sharp edges that can hurt you.
Do not touch any of the engine components while the machine is running or just after it has stopped due to the
high temperatures it reaches.
61
EN

Werbung

loading