Eco Mode - Philips GC9500 Bedienungsanleitung

Energy saving

ECO mode

By using ECO mode (reduced amount of steam), you can save energy
without compromising on the ironing result.
1 To activate the ECO mode, press and hold the on/off button for
2 seconds. The light turns green.
2 To switch back to the 'OptimalTemp' setting, switch the steam
generator off and on again.
Safety Auto-off (specific types only)
The Safety Auto-off function automatically switches off the appliance if
it has not been used for 10 minutes, to save energy.
IMPORTANT - Cleaning and maintenance
IMPORTANT - Descaling the steam generator
To ensure a long life for your steam generator, it is very important that
you perform the descaling procedure when the EASY DE-CALC light
starts to flash.
- The EASY DE-CALC light starts flashing after approx. one month or
10 ironing sessions to indicate that the steam generator needs to be
descaled. To descale the steam generator, perform the steps below.
Never remove the EASY DE-CALC knob when the steam generator
is hot.
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Place the steam generator on a stable table with the EASY
DE-CALC knob sticking out beyond the edge of the table or
take the steam generator to a sink.
3 Hold a cup under the EASY DE-CALC knob. Turn the EASY
DE-CALC knob anti-clockwise and let the water with scale particles
flow into the cup. When no more water comes out of the steam
generator, reinsert the EASY DE-CALC knob. Turn the knob
clockwise to fasten it and put the plug back into the socket again.
You can now use the steam generator again.
ENGLIsH
9