Herunterladen Diese Seite drucken

BYD Battery-Box HV Aufbauhilfe Seite 9

Vorschau ausblenden Andere Handbücher für Battery-Box HV:

Werbung

EXPANSION With or without charger -
Without charger
14.
Ohne Ladegerät
Charge or discharge the original battery system so that its SOC becomes 30% to 40%, and add a new battery module. The small SOC difference will be automatically
balanced within about 2 weeks. (Battery-Box capacity may vary within this time).
Laden oder entladen Sie das ursprüngliche Batteriesystem so, dass der Ladezustand 30% bis 40% beträgt. Fügen Sie dann ein neues Batteriemodul hinzu. Die kleine
Kapazitäts-Differenz wird innerhalb von etwa 2 Wochen automatisch ausgeglichen. (Die Kapazität der Batterie-Box kann innerhalb dieses Zeitraums abweichen.)
New Battery
Neue Batterie
SOC = 30%-40%
With Charger: Connection
15a.
Mit Ladegerät: Verbinden
Charging = Green LED blinking
Laden = Grüne LED blinkt
HV Charger
Adjust Installation Parameters
15d.
Anpassen der Installations Parameter
1
Battery-Box HV
STEP 1
Privacy Policy
Installation
Time and Date
Home
Device Information
Installation Config
1
Statistics Information
Current Alarm
STEP 1
History Alarm
Run Date
Set Password
Update
*
If the parameters are not configured correctly,
the system might not work normally.
*
Falls Parameter nicht korrekt konfiguriert sind,
arbeitet das System möglicherweise nicht normal.
1
STEP 1
All manuals and user guides at all-guides.com
ERWEITERUNG Mit und ohne Ladegerät
Original Battery
Bestehende Batterie
SOC = 30%-40%
With Charger: Charge to 100 %
15b.
Mit Ladegerät: Laden auf 100 %
100 % SOC = Green LED constantly on
100 % SOC = Grüne LED konstant leuchtend
SOC=100%
2
STEP 2
FINISH & REBOOT
*
Hour :
Min :
2
STEP 2
FINISH & REBOOT
2
STEP 2
FINISH & REBOOT
HV Charger
3
Day
:Month :
Year :
Next
3
Server IP Address
*
Series Battery Conts
Inverter
*
Country
*
Asterisk(*)Indicates required fields
Last
3
With Charger: Add at 100 % SOC
15c.
Mit Ladegerät: Hinzufügen bei 100 %
SOC of new and original Battery must be at 100 %
Ladezustand der bestehenden Batterie muss 100% sein
New Battery
Neue Batterie
SOC = 100%
Original Battery
Bestehende Batterie
SOC = 100%
bboxhserver.byd.com.cn
n+m
*
n = 4-8 original Modules
Next
m = 1-5 new Modules
n + m = max. 9

Werbung

loading