Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation:
Recommandations:
•
Install one smoke detector each room if possible.
•
Keep the louvers free from dust and dirt.
•
Perform functional tests in regular intervals.
•
Make sure the battery is not too weak.
•
Exchange each smoke detector every 5 years for safety reasons.
In case of alarm leave the building as fast as possible and call the fire fighters from outside. Do not
open doors if smoke is pouring out and never open windows if they are not your exit!
•
•
•
•
•
•
•
•
•
•
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Choose a suitable installation place for the smoke
detector. If mounted on the ceiling in the centre of the
room assures an optimal performance of the smoke
detector.
Keep a distance of at least 15 cm from each wall and at
least 50 cm from each corner.
Avoid places with increased dust, gas or dirt load because
they can cause false alarms (i.e. kitchen).
Use the screw holes of the bracket as drill template.
Bore the holes with a 5 mm drill and insert the wall plugs.
Fasten the bracket to the ceiling.
For energizing the smoke detector insert the battery. Now
the LED should flash every 35 seconds.
Hold the smoke detector to the bracket and turn it
clockwise to fasten it.
Press the test button until the audio warning sounds and
the LED flashes in a high frequency.
If the battery is getting weak the smoke detector shows
by irregular flashing of the LED and an audio warning
every minute.
530-067
Werbung
