Conversion Of The Transmitter From Mode 2 To Mode 1 - Carson Tyrann 380 Pro Betriebsanleitung

4
Connect the cables.
h. Conversion of the Transmitter from Mode 2 to Mode 1
Open the cover of the transmitter by unscrewing the 6 screws. See
picture.
a
Important: Lift the arm and insert screw a from the left side.
5
Replace the battery box.
Unscrew screws a, b, c and move screw b, c an the spring to the other
side. Fix it with the screws, and test if the stick moves smooth.
At the end close the cover again with the 6 screws. Pay attention that
no cable will be squeezed.
CARSON Mini Tyrann 380 Pro • 50 050 7052
6
Fasten the cover with the screw.
b
a
c
GB
b
a
c
33