Changing The Default Settings; Reset To The Default Settings; Troubleshooting; Alarm Signals Summary: Red Display - Saeco Incanto HD8911/02 Handbuch

Display
180'
60'
STANDBY
30'
15'
DISPLAY
CONTRAST
4
WATER
3
HARDNESS 2
1
AquaClean water
WATER
ON
FILTER
0/8 0/8
8.2

Changing the default settings

DISPLAY
CONTRAST
8.3

Reset to the default settings

RESET
9.

Troubleshooting

9.1

Alarm signals summary: red display

Display
Put back the drip tray and coffee
grounds drawer; close the service
door.
16
ENGLISH
Setting Value
Stand-by time 15 minutes
Contrast average
4 (very hard
Water hardness
water)
to be installed
filter
It is possible to customise the machine functions through the programming menu. The
machine must be turned on and ready to work.
If necessary, refer to the "8.1 List of default settings" chapter.
>
Press the MENU' button and scroll through functions list to select the function whose
settings are to be modified:
Note: the images at the side refer to a sample function.
>
Press the OK button to select the desired function.
Once selected:
>
Press the UP button to increase the value.
>
Press the DOWN button to decrease the value.
>
Press the OK button to confirm the change.
When the change has been implemented, the OK message will be displayed.
The modified but unconfirmed values will not be stored.
>
Press the ESC button to exit the programming function.
The machine automatically exits the programming mode if no button is pressed for
3 minutes.
It is possible to restore the default settings through the programming menu. The
machine must be turned on and ready to work.
>
Press the MENU' button and scroll through functions list to select the RESET function.
>
Press the OK button to select the function.
When the change has been implemented, the OK message will be displayed.
>
Press the ESC button to exit the programming function.
The machine automatically exits the programming mode if no button is pressed for
3 minutes.
This chapter summarises the most common issues that might concern your machine.
If the following information is insufficient to solve the problem, please refer to the FAQ
page of the www.saeco.com/support website, or contact the Philips Saeco hotline.
Contacts are included in the warranty booklet supplied separately or can be found at
www.saeco.com/support.
The machine is colour coded for easier interpretation of the display signals. The colour
code of the symbols is based on the traffic light concept.
Description
Description
Stand-by time setting.
Display contrast setting.
Water hardness setting. For further details, please
refer to the "5.3.1 Water hardness measurement and
setting" chapter.
AquaClean settings. For further details, please refer
to the "10.2 AquaClean water filter" chapter.
Action
Read the "7.1.1 Machine cleaning when needed"
chapter to restore the components to their proper
places.