Werbung
Verfügbare Sprachen
Verfügbare Sprachen
»Car System 2« software
As soon as a new module has been detected, it will appear in the syn-
ƒ
opsis on the left.
Removing modules
Only the last module in the list can be removed! Thus, should you want
ƒ
to remove for instance the fourth module of a total of five, you will have
to remove first module 5 and then, module 4.
Start the »Car System 2« software.
X
Select menu point Allgemein >> Modul Werkseinstellungen [General
X
>> Module Default settings].
Now disconnect the connection cable of the module concerned.
X
Settings
EN
Fig. 13: Module in the application window
In the central section of the application window there is a picture of the
ƒ
computer module.
On the left you can see the port used for power supply with 16 V alter-
ƒ
nating current.
On the right you can see the sockets used for the connection to the
ƒ
computer as well as a LocoNet socket to connect one or several expan-
sion modules.
At the top there are the inputs (E1 - E11) to which sensors, push but-
ƒ
tons or other potential-free switches can be connected.
42
Werbung
