Product Description - Zanussi ZFM15100 Benutzerhandbuch

Electrical connection
Warning! Risk of fire and electrical
shock.
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on
the rating plate agrees with the power sup-
ply. If not, contact an electrician.
• If the appliance is connected to the socket
via an extension cord, make sure the cord is
earthed.
• Make sure not to cause damage to the
mains plug and to the mains cable. Contact
the Service or an electrician to change a
damaged mains cable.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use
Warning! Risk of injury, burns or electric
shock or explosion.
• Use this appliance in a household environ-
ment.
• Do not change the specification of this ap-
pliance.
• Make sure that the ventilation openings are
not blocked.
• Do not let the appliance stay unattended
during operation.

Product description

www.zanussi.com
1 2 3 4
8 7 6 5
• Do not apply pressure on the open door.
• Do not use the appliance as a work surface
and do not use the cavity for storage purpo-
ses.
Care and Cleaning
Warning! Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appli-
ance and disconnect the mains plug from
the mains socket.
• Clean regularly the appliance to prevent the
deterioration of the surface material.
• Do not allow food spills or cleaner residue
to accumulate on door sealing surfaces.
• Remaining fat or food in the appliance can
cause fire.
• Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
• If you use an oven spray, obey the safety in-
structions on the packaging.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
Lamp
1
Safety interlock system
2
Control panel
3
Power setting knob
4
Timer knob
5
Door opener
6
Waveguide cover
7
Turntable shaft
8
5