System Settings; Default Pod Arrangement; Examples Of Pod Order Rearrangement - Chauvet DJ GigBAR IRC Bedienungsanleitung

System
Settings
Default Pod
Arrangement
Examples of
Pod Order
Rearrangement
GigBAR™ IRC User Manual Rev. 8
To restore factory default settings, or make changes to individual pod settings, follow the
directions below.
1. Press <MENU> repeatedly until SyS blinks on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select rSEt (factory default) or dSET (changes pod
arrangement).
4. Press <ENTER> to select the desired system setting.
If rSEt is selected, GigBAR™ IRC is restored to factory default settings.
Pod 4
If dSEt is selected, change the order of the pods by using the
steps and examples below to arrange the order of the pods:
·
Use <UP> to move right on the display.
·
Use <DOWN> to change the digit value (1, 2, 3, or 4).
·
Press <ENTER> to confirm.
·
Repeat until all 4 pods are arranged as desired.
Pod 2
Pod 3
Pod 3
Pod 3
Pod 4
Ex. 1
Pod 4
Ex. 2
Pod 2
Pod 1
Move Right
· *234
· 12*4
Pod 1
Pod 2
Pod 1
· 1*34
Pick a Digit
· 123*
1, 2, 3, or 4
Page 25 of 158