Statement 1053-Class 1M Laser Radiation; Statement 1055-Class I And Class 1M Laser; Statement 1056-Unterminated Fiber Cable; Statement 1071-Warning Definition - Cisco Firepower 1000 Bedienungsanleitung

Regulatory Compliance and Safety Information—Cisco Firepower Management Center 1000, 2500, and 4500
Statement 1053—Class 1M Laser Radiation
Warning Class 1M laser radiation when open. Do not view directly with optical instruments.
Statement 1055—Class I and Class 1M Laser
Warning Class I (CDRH) and Class 1M (IEC) laser products.
Statement 1056—Unterminated Fiber Cable
Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not view
directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye
loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard.
Statement 1071—Warning Definition
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any
equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each warning to locate its translation in
the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Regulatory Compliance and Safety Information—Cisco Firepower Management Center 1000, 2500, and 4500
7