Werbung
Verfügbare Sprachen
Verfügbare Sprachen
18 | English
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates, rubber and
laminate/HPL (High Pressure Laminate) while resting firmly
on the workpiece. It is suitable for straight and curved cuts
with mitre/bevel angles of up to 45°. The saw blade recom-
mendations are to be observed.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Cordless jigsaw
Article number
Handle shape
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
1 609 92A 6W5 | (03.11.2022)
(1) Shock protection guard
(2) Saw blade receptacle
(3) SDS lever for saw blade release
(4) Worklight
(5) Lock-off function for on/off switch (3 601 EB3 0..)
(6) On/off switch
(7) Stroke rate preselection thumbwheel
a)
(8) Rechargeable battery
(9) Rechargeable battery release button
(10) Handle (insulated gripping surface)
(11) Hex key
(12) Base plate
a)
(13) Glide shoe
(14) Sawdust blower device switch
(15) Orbital action adjusting lever
(16) Guide roller
a)
(17) Saw blade
(18) Worklight button (3 601 EB2 0..)
(19) Anti-splinter guard
a)
(20) Hood for dust extraction
a)
(21) Extraction outlet
a)
(22) Extraction hose
(23) Base plate screw
(24) Scale for mitre/bevel angles
a)
(25) Guide for parallel guide
(26) Locking screw for parallel guide
(27) Parallel guide with circle cutter
a)
(28) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GST 185-LI
3 601 EB3 0..
Bow
V=
18
−1
min
0–3500
mm
26
mm
125
mm
20
mm
10
°
45
A)
kg
2.4–3.4
°C
0 to +35
a)
a)
a)
GST 185-LI
3 601 EB2 0..
Barrel
18
500–3500
26
125
20
10
45
A)
2.3–3.3
0 to +35
Bosch Power Tools
Werbung
