Special Settings; Displaying Signal Information - Grundig 40 VLE 5430 BP Servicehandbuch

SPECIAL SETTINGS

----------------------------------------------------------------------------------------
Searching for all digital televi-
sion channels from a satellite
automatically
New satellite channels are added or satellite
data is changed frequently. Therefore, we rec-
ommend you to run auto search function from
time to time.
All transponders are scanned for new channels.
1
Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
» > « or » < « and press »OK« to confirm.
– »Source Setup« menu is displayed.
Sound Settings Parental Guidance
Source Setup
Automatic Channel Search
OK
Manual Channel Search
Channel Editor
Advanced Settings
Change Area Back Exit
4
Select the line »Automatic Channel Search«
with » « or » « and press »OK« to con-
V Λ
firm.
– Menu is displayed.
5 < >
Select the option »Satellite« with » « or » «
and press »OK« to confirm.
6
Confirm the push button »Next Page« with
»OK«.
7 Select the Channel Type.
< >
Press » « or » « to select whether you want
to search for only digital channels (Digital)
or only radio channels (Radio) or both
(Digital + Radio) and press »OK« to select
and mark or unmark the »Digital« and/or
»Radio« items.
82 ENGLISH
8 Select Scan Type.
To select whether you want to search for
only free digital television channels (Free),
only scrambled digital television channels
(Scrambled) or both (Free + Scrambled),
< >
press » « or » « and press OK« to select
and mark or unmark the »Free« and/or
»Scrambled« items.
9 Press the » « red button to start searching.
Notes:
When updating via the same satellites a
7
security query is displayed at the start of a
search.
If the previously stored channels should be
7
retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels will
7
be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
10
Switch to the channel Editor with » « (yel-
low) ;
or
press »EXIT« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------

Displaying signal information

(only for digital television channels)
1
Open the menu with »MENU«.
2
Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
> <
» « or » « and press »OK« to confirm.
– »Source Setup« menu is displayed.
4 Select the line »Advanced« with » « or
V
» « and press »OK« to confirm.
Λ
5 Select the line »Signal Information« with
» « or » « and press »OK« to confirm.
V Λ
– »Signal Information« menu is displayed.
Notes:
Signal information changes depending on
7
the current source.
Signal information is shown on the left of the
7
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
The signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the signal
level display.
6 Press »EXIT« to close the menu.
Deactivate and activate HbbTV
This option allows turning off Hbb TV feature,
thus warnings shall not be displayed on chan-
nels with Hbb TV feature.
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
» > « or » < « and press »OK« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with » « or
V
» « and press »OK« to confirm.
Λ
5
Select the line »Hbb TV« with » « or » «.
V Λ
6 Select the option (»Off«) with» < « or » > «.
Note:
To activate HbbTV again, select in step. 6
7
the option »On«.
7 Press »EXIT« to end the setting.
Deactivate and activate digital
teletext
If you deactivate digital video text, only normal
video text can be selected, however the other
functions of the interactive service HbbTV are still
available.
1
Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Source Setup« with
» > « or » < « and press »OK« to confirm.
– »Source Setup« menu is displayed.
4
Select the line »Advanced« with » « or
V
» « and press »OK« to confirm.
Λ
5 Select the line »Digital Teletext« with » « or
V
» «.
Λ
6 Select the option (»Off«) with» < « or » > «.
Note:
To reactivate digital teletext, select »On« in
7
step 6.
7
Press »EXIT« to end the setting.
ENGLISH 91