V-TAC VT-543 Installationsanweisungen

INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read
these instructions carefully before starting the installation and keep this manual handy for
future reference. If you have any another query, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the
product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24
Hours a day would void the warranty. This product is warranted for manufacturing defects only.
Our products are designed to comply with the recommendations of BS EN 60598-1:2008 code
of practice for emergency lighting and should be installed by a competent person in accordance
with the relevant regulations. Before installation of any type of emergency lighting always seek
the advice of the local fire prevention officer (or equivalent authority).
WARNING!
1. Please make sure to turn off the power before
starting the installation.
2. The light source of this luminaire is not replaceable,
when the light source reaches its end of life the whole
luminaire should be replaced.
3. Installation should only be done by a certified
electrician.
This marking indicates that this
product should not be disposed
of with other household wastes.
LUMINAIRE INFORMATION
• Watts: 3W
• Lamp Type: 16 SMD LEDs, Wall-Bulkhead
• Lumens: 140 LM
• Input Power: AC: 220-240V, 50/60Hz
• Protection Rating: IP65
• Operation Time: >3 Hours (Maintained)
• Charging Current: 70~150mA
OPERATION DIAGRAM
For Maintained Operation - Maintained operation, link L (Switched Live) to terminal Ls (perma-
nent Live). If 'Ls' is not connected, the fitting works as non-maintained
All self-contained emergency lighting luminaires require a continuous (un-switched) 220V-240V
single phase 50hz (L) supply to keep the inbuilt batteries charged.
Note: the LEDs contained in this fitting are not designed to be replaced.
INSTALLATION INSTRUCTION
EMERGENCY LIGHTS (VT-543)
Caution, risk of
electric shock.
WEEE Number: 80133970
MAINTAINED
Ls N L
• Discharging Current: 100~450mA
• Battery type: Ni-Cd 3.6V 1200mAh
• Recharge time: 12 hours
(Initial charge: 36 hrs)
• Indicator: Green Light Indicator
• Material: PC Cover
• Product size: 346x107x60 mm(LxWxH)
• 4 Legends included
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
NON-MAINTAINED
Ls N L