LD Systems LDCURV500WMBL Kurzanleitung

Vorschau ausblenden

Seite von 2

/ 2
Lesezeichen

Verfügbare Sprachen

Quicklinks

Diese Anleitung herunterladen

USER´S MANUAL

LDCURV500WMBL(W)

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. During installation, observe the applicable safety regulations for your country.

7. Never place sources of ignition, e.g., burning candles, on the equipment.

8. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in

this case, observe the special instructions noted below. Do not expose this equipment to flammable materials,

fluids or gases.

9. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with

liquids, such as vases or drinking vessels, on the equipment.

10. Make certain that objects cannot fall into the device.

11. Use this equipment only with the accessories recommended and intended by the manufacturer.

12. Do not open or modify this equipment.

13. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping

hazards.

14. During transport, make certain that the equipment cannot fall down and possibly cause property damage

and personal injuries.

15. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if

it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a

powered device). This equipment may only be repaired by authorized, qualified personnel.

16. Clean the equipment using a dry cloth.

17. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate

plastic and paper/cardboard.

18. Plastic bags must be kept out of reach of children.

CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!

This equipment is intended for professional use. Therefore, commercial use of this equipment is subject to the

respectively applicable national accident prevention rules and regulations. As a manufacturer, Adam Hall is ob-

ligated to notify you formally about the existence of potential health risks. Hearing damage due to high volume

and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL) that

can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid

prolonged exposure to volumes in excess of 90 dB.

To prevent possible hearing damage, avoid listening at high volume levels over long periods of time.

Even exposure to short bursts of loud noise can result in hearing loss. Please keep the volume

constantly at a comfortable level.

MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at:

pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach

/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be

treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal.

Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity.

Household users should contact either the retailer where they purchased this product, or their local government

office, for details on where and how they can recycle this item in an environmentally friendly manner.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This

product should not be mixed with other commercial wastes for disposal

CE CONFORMITY

Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):

R&TTE (1999/5/EC) or RED (2014/53/EU) from June 2017 / Low-voltage directive (2014/35/EU)

EMC Directive (2014/30/EU) / RoHS (2011/65/EU) / The full declaration of conformity can be found at www.adam-

hall.com. You can also request it via info@adamhall.com

https://cdn-shop.adamhall.com/media/

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany

Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com

COMPONENT DESCRIPTION AND INSTALLATION

Wall mounting bracket with six screw holes (6.2 mm). Screw the adjustable bracket (in a suitable position) to a

load-bearing wall. Use suitable screws and plugs etc. to ensure secure mounting.

Retractable rail with two fixing screws to adjust distance from the wall. Loosen the two screws (A) with a 5 mm

Allen key whilst holding the nuts with a 10mm ring or open spanner. Once the desired distance is achieved, re-tight-

en the screws.

Aluminium casting with fixing screw for adjustment of horizontal dispersion direction. Use a 5 mm Allen key.

Aluminium casting with calibrated slots and fixing screw for adjustment of vertical dispersion direction. Use a 4 mm

Allen key.

Metal plate with calibrated slots for installation of the CURV 500 SmartLink adapter and adjustment of the disper-

sion direction. Use a 4 mm Allen key. A PH2 Phillips screwdriver is required for assembly of the CURV 500 SmartLink

adapter. (For mounting points, refer to the CURV 500 SLA manual).

After installation and adjustment, ensure that all screws and nuts are re-tightened. An M3 thread is situated on the rear

side of the CURV 500 satellite for the installation of a secondary safety component.

SPECIFICATIONS

Item Number:

LDCURV500WMBL

Type:

Installation Loudspeaker Accessories

Part:

Wall Mount Bracket

Suitable for:

1 SmartLink Adapter + up to 6 LD CURV 500 single or

3 double satellites

Material:

Steel/Aluminium

Surface:

Powder Coated

Colour:

Black

Max. Load:

11 kg

Dimensions (W x H x D):

80 mm x 120 mm x 440mm

Weight:

1.7 kg