Werbung
Quicklinks
All manuals and user guides at all-guides.com
INSTALLATION GUIDE FOR DOCUMENT FINISHER
GUIDE D'INSTALLATION DU RETOUCHEUR DE DOCUMENT
GUÍA DE INSTALACIÓN PARA EL FINALIZADOR DE DOCUMENTOS
INSTALLATIONSANLEITUNG FÜR DOKUMENT FINISHER
GUIDA ALL'INSTALLAZIONE DI FINITRICE DI DOCUMENTI
ドキュメントフィニッシャ設置手順書
DF-730
Werbung
Verwandte Anleitungen für Kyocera DF-730
Inhaltszusammenfassung für Kyocera DF-730
- Seite 1 All manuals and user guides at all-guides.com INSTALLATION GUIDE FOR DOCUMENT FINISHER GUIDE D’INSTALLATION DU RETOUCHEUR DE DOCUMENT GUÍA DE INSTALACIÓN PARA EL FINALIZADOR DE DOCUMENTOS INSTALLATIONSANLEITUNG FÜR DOKUMENT FINISHER GUIDA ALL’INSTALLAZIONE DI FINITRICE DI DOCUMENTI ドキュメントフィニッシャ設置手順書 DF-730...
- Seite 2 All manuals and user guides at all-guides.com...
- Seite 3 All manuals and user guides at all-guides.com AK-71C E Binding screw M4 × 6 ........4 For installing the document finisher to a full- English F Binding screw M4 × 10........4 color machine, parts (H), (I), and (J) above G Clamp supplied with the job separator are needed.
- Seite 4 All manuals and user guides at all-guides.com [Steps 1 to 4 below are only for full- When installing the document finisher to a full- 2. To align the document finisher with the paper color machines.] color machine, install the job separator in outlet of the MFP, slide the legs of the advance.
- Seite 5 All manuals and user guides at all-guides.com [Steps 1 to 6 below are only for 3. Fit the fixing plate F (H) and the fixing plate 4. Fit the latch catch that has been assembled monochrome machines.] R (I) to the latch catch (B) using an S Tite in step 3 to the left cover (3) using the two S screw M4 ×...
- Seite 6 All manuals and user guides at all-guides.com 3. Fit the curl eliminator (K) to the eject cover 5. Close the eject cover (1). 7. Align the rail retainer (C) with the groove of (1) such that the projections (4) on the cover 6.
- Seite 7 All manuals and user guides at all-guides.com 8.0 mm 8.0 mm 8. Orient the guide rail (D) such that its pulley 9. Secure the rail retainer (C) to the MFP using 10. Insert the guide rail (D) into the bottom of the (5) is positioned toward the MFP.
- Seite 8 All manuals and user guides at all-guides.com 10mm 10mm Fitting and adjusting the guide rail 12. Separate the document finisher (A) from the 13. Loosen temporarily the two screws (7) that secure the sheet metal (6) of the rail mounting plate (C) on 11.
- Seite 9 All manuals and user guides at all-guides.com Adjusting the height of the document Slide the document finisher to engage it with the finisher latch catch of the MFP. If the document finisher and the MFP do not engage securely, perform 1.
- Seite 10 All manuals and user guides at all-guides.com 2. Loosen the two screws (10) on the rear right caster of the document finisher (A). Adjust the height of the rear right caster by turning its adjustment bolt (13) using a cross-headed screwdriver so that the axis of the pin (11) of the latch catch is aligned with the marking of the slot (12) of the document finisher (A) when the document finisher (A) is joined to the MFP (viewed from the machine front).
- Seite 11 All manuals and user guides at all-guides.com 3. Adjust the height of the front right caster in the same manner as in step 2 so that each center of 4. Adjust the height of the left two casters in the the hooking portions (15) of the latch catch is aligned with the center of the two hooks (14) on the same manner as in step 2 so that the right document finisher (A) when the document finisher (A) is joined to the MFP (viewed from above).
- Seite 12 All manuals and user guides at all-guides.com Connecting the signal cable Connecting the signal cable 5. Reattach the removed parts to their original (monochrome machines only) (full-color machines only) positions. 1. Connect the signal cable (17) of the 1. Connect the signal cable (17) of the document finisher (A) to the MFP, pass the document finisher (A) to the MFP.
- Seite 13 All manuals and user guides at all-guides.com Operation check 1. Insert the MFP power plug to the wall outlet and turn the main switch on. 2. Make test copies and check that the document finisher (A) operates correctly. Vérification du fonctionnement 1.
- Seite 14 All manuals and user guides at all-guides.com MEMO...
- Seite 15 All manuals and user guides at all-guides.com...
- Seite 16 All manuals and user guides at all-guides.com 2005. 11 305H156710 Rev.1.0...