BURG WÄCHTER WinSafe WS 11 Montage- Und Bedienungsanleitung Seite 13

A. General instructions
The window protection WS11 is approved by
VdS 2536 and tested according to DIN 18104-1.
According to DIN 18104-1 at least one additional
protection should be mounted on each side for
The borehole depths and screw lengths must be
matched according to local conditions. Do not
pierce the windows / French doors, eventually
work with a drill stopper. When drilling do not
damage any moving parts, seals or glass panes.
The mounting screws should be tightened by
hand to avoid overtighting.
For any possible injuries and / or damages
caused by improper handling during
assembly, the manufacturer accepts no
liability.
As an additional security measure, the use of a
BURG-WÄCHTER mounting anchor MA 99 DUO
is recommended.
WinSafe WS 11
every 1 m window height.
On the operating side (handle
side) at least one additional
protection must be lockable.
English | 13