Adam Hall SUPER CLAMP 710 BMK2 SET 1 Bedienungsanleitung

USER´S MANUAL
SUPER CLAMP 710 BMK2 SET 1
UNIVERSAL HOOK CLAMP WITH CLAMPING LEVER
BLACK AND WITH BOLT SS018
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the
equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure
and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging,
please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your
local distributor.
11. Check load capacity of tube prior to the fixing.
12. Do not use when defective
IMPORTANT:
Before installation, check that all installation kit components are complete, undamaged and
work correctly (e.g. bolts, nuts, locking pins, threads in speakers, etc.). Should any installation kit
component be damaged, missing or not function properly, the installation kit should not be used.
Pay attention to the maximum load of all components. During installation, attach a suitable
secondary safety component if necessary.
Overhead mounting requires extensive experience, including the calculation of the load limit
values of the installation material and regular safety inspection of all installation materials and
devices, such as lights and speakers. If you do not have these qualifications, do not attempt to
perform an installation yourself. Refer instead to a qualified professional.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https:/ /cdn-shop.adam-
hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
SPECIFICATIONS
Model name: SCP710BMK2SET1
Product type: Truss Accessories
Components: Universal clamp SCP710BMK2 mounting pin SS018
Weight: 0.544 kg
Universal clamp SCP710BMK2
Type: Universal clamp
Material: Die-cast aluminum
Finish: Powder coated
Color: Black
Suitable for tubing 13-55 mm
diameter:
Flange: For mounting pin SS017 or SS018
Weight: 0.48 kg
Safe working load 20 kg
(SWL):
Additional features: TÜV-certified
Mounting pin SS018
Type: Mounting pin for universal clamp
Material: Brass
Finish: Unfinished
Thread: M10 x 16
Weight: 0.064 kg
Additional features: M10 wing nut included
5
7
2
6
4
1
8
2
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
INTRODUCTION
The SCP710BMK2SET1 mounting kit comprises the universal clamp SCP710BMK2 and
the mounting pin SS018, and is suitable for secure mounting of lights, speakers and other
devices to traverses and tripods.
PART DESCRIPTION
1
2
9
Adjustable clamping lever for attaching the universal clamp.
1
M6 T-screw for securing the mounting pin.
2
Mounting pin with M10 thread and M10 wing nut.
3
Flange for mounting bolt.
4
Spring-loaded locking pin.
5
M5 thread
6
M6 thread
7
Clamp opening (adjustable from 13 to 55 mm).
8
Plastic adapter for mounting on a square tube. Insert the wedge-shaped adapter into
9
the 90° angled recess of the upper clamp jaw.
FEATURES
• Perfect for lighting and multimedia applications
• One-Click Auto-Lock
• Adjustable clamping lever - can be operated in any position
• For mounting to round and rectangular tubes, as well as flat objects
• 5/8" (16 mm) hexagonal or round pin insert
• 1 x M6 and 2 x M5 thread
• Certified by TÜV (Germany)
• Load capacity: 20 kg
• Rust-proof
DESCRIPTION
When you face challenges like mounting lighting equipment, positioning cameras or loud-
speakers at the proper angle, hanging Molton and backdrops, or mounting other equipment
safely on a truss, you need just the right companion you can trust in.
The new Super Clamp now offers you the possibility to fix heavy objects such as lighting
equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly
into place.
Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician
attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.
As well as having an impressive load capacity, the rugged Super Clamp can be used in
practically any situation and on any surface - curved or flat. Your new clamping companion
can support up to 20 kg and enjoys German TÜV certification.
See for yourself how quick and easy it is to mount your equipment securely using the Super
Clamp.
MOUNTING
• Attach a device suitable for traverse mounting to the mounting pin (No. 3) with the M10 wing nut.
• Mount the universal clamp on a traverse or stand in a suitable position using the adjustable
clamp lever (No.1) and ensure a firm grip.
• Loosen the locking screw (No.2) so far that the flange (No.4) on the underside of the clamp can
accept the mounting pin (No.3) (do not remove the bolt).
• Push the spring-loaded locking pin (No.5) on the side of the clamp into the housing so that the
flange (No.4) on the underside of the clamp can accept the mounting pin and push
the pin all the way into the flange.
• Release the pressure from the locking pin and keep hold of the device being mounted until you
are certain that the mounting pin is fully engaged.
• Rotate the device to achieve the desired dispersion and secure the connection by tightening
the lockin screw (No. 7).
When mounting devices to traverses and stands, pay attention to the information in the safety
instructions in this manual, and in particular the information under 'Important' .
8
3