Beko B43 A 670 A Bedienungsanleitung Seite 153

DETAILED CHANNEL SETTINGS
Displaying signal information
(only for digital television channels)
1 Press »MENU« to open the menu.
2 Press » « or » « to select the »Channel«
V Λ
menu and press »>« to confirm.
– »Channel« menu is now enabled.
3 Select »Signal Information« using »
» « and confirm with »OK«.
Λ
– »Signal Information« menu will be dis-
played.
Notes:
Signal information changes depending on
7
the current source.
The signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
4 Press »EXIT« to finish the screen display.
Television / User Manual
« or
V
----------------------------------------------------
71 / 81 EN