Setting The End Stops; Shutter Drive - Chamberlain WPD60UP-05 Einbau- Und Bedienungsanleitung

Operate the roller shutter drive/Important notes
In the following, we describe the neces-
sary settings for operating your roller

shutter drive.

We use this symbol if you need
to press or tap a
corresponding button.
This means: Release button.
Observe timeout
If there is no input in the settings for a
long time, the unit switches back from
the corresponding input mode to the
default display with the current time.
Deactivating times
Set the relevant time to the value 0:00,
so that the associated control com-
mand is not executed.
14
Note
Press the Set button, for example, when

setting the end stops.

The Set button lies slightly recessed
into the cover. To press the Set button,
please use a small pin or something
similar.
I 2 : 0 0
AUTO