Storage; Required Tools - Weh TW156 Bedienungsanleitung

AE Operating instructions
5�2

Storage

Î
Follow the safety instructions in Chapter 5.1 and observe the following storage
times. The appropriate storage period applies from the date of delivery (i.e. the date
of invoicing or goods issue date as recorded by WEH or its distributor). If the
WEH Product is installed in a complete system, the storage time depends on the
®
component with the shortest storage time.
Up to 3 years
> 3 years

6. REQUIRED TOOLS

Part no�
--
--
--
E99-44923
Page 14
MD-10021-L51-R2.1.0-03
Note: If you should have any doubts about the aging state of the stored
WEH Product, please contact WEH.
®
Attention: Before commissioning, check the WEH
tightness. On this topic, see Chapter 7. Installation on page 15.
- Before use, all elastomer seals must be replaced.
Î
For this, send the WEH
Description
Suitable calibrated torque wrench
(suitable for the corresponding torque)
Suitable open-ended wrench insert
(suitable for the relevant wrench sizes and torque wrench)
Vice with aluminium jaws
WEH Lubricant
®
Product to WEH for maintenance.
®
Installation
Product for leak
®
Mainte-
nance &
Lubrication
X
X
X
X