USING THE TURBO MODE BUTTON
The TURBO (4) mode button has two speed settings. Push the button
up (sport mode) for a quick cut or for cutting very thick hair. Push the
button down (normal mode) for cutting thinner hair.
MAINTENANCE AND STORAGE
WARNING! Always disconnect the
appliance from mains power before
cleaning or performing maintenance.
Switch the appliance off and clean immediately after each use or if the
cutting head is excessively fouled with hair or dirt.
• Do not use powdered products, abrasive liquid products or
solvents such as alcohol or petroleum-based products to clean the
appliance.
• Do not immerse the appliance in water or any other liquid as this
will damage the appliance itself.
WARNING! Before each use, lubricate
generously along the entire length of the
blades with the oil included with the
appliance. At the end of every use clean
the blades with the comb supplied and
lubricate them again.
25
EN