vonia OL12-BD031B Handbuch Seite 26

Long press this button to query the current room temperature, The LED display shows the current
room temperature for 5 seconds and automatically returns to display the current humidity. If this
button is pressed for a long time, it will display the ambient temperature.
TIMER button
Press this button to set the timer function to 0–24 hours. The interval is 1 hour. Each time you press
this button, the value increases by 1 hour, and then the corresponding timing value is displayed on
the screen. The setting value is "00" to cancel the timer function. The indicator goes out.
After the timer is set and completed, the timer LED is on during the timing period. After the timing is
over, the timer LED turns off automatically.
In the running state, set the time to turn off the device.
In the standby state, set the time to turn on the device.
SPEED button
The wind speed can only be adjusted in the automatic mode. Press this button to switch the high
and low wind speeds. The corresponding wind speed indicator lights up.
LOCK button
Long press this button to open the child lock function. The child lock indicator light is on. All the
buttons are locked and cannot be operated. Press this button again, the indicator light will go out,
and the button will be restored.
A shutdown or power off will automatically cancel the child lock function.
5.2. The 3 color digital display
Ambient humidity <45: The light isblue
≤45% Ambient humidity≤65%: The light is green
Ambient humidity>65%: The light isred
If the LED displays E0, E2, CL, CH, LO, HI:The light is red.
- 25 -