VTOMAN Jump 600X Bedienungsanleitung Seite 12

(1)Weak Light Mode: Short press the LED button on the power
station to turn on the light, it enters the weak light mode;
(2)Medium Light Mode: Press the LED button twice to enter
medium light mode;
(3)Strong Light Mode: Press the LED button three times to
enter strong light mode;
(4)Strobe Mode: Press the LED button four times to enter strobe
mode;
(5)SOS Mode: Press the LED button five times to enter SOS
mode. Press the LED button again to turn the light off.
6.FAQs
1. What devices can the Jump 600X power?
With 600W rated power and 1200W peak power, the AC output
ports can normally power devices and appliances with a rated
power less than 600W. Besides, if the total operating power of
the devices connected to the battery's AC socket exceeds the
battery's 600W rated power, Jump 600X will not automatically
disconnect the AC output, but will continue to output at a con-
stant power of 600W. However, it's not applicable for all electric
appliances, some appliances with strict voltage requirements
may not function.
2.How to know the working time for my device?
Working time=299Wh*0.85 / operating power of your device.
3.How long can Jump 600X charge my devices?
The charging time is shown on the product's LCD Screen, which
can be used to estimate the charging time of most appliances
with stable power usage.
4.Can the Jump 600X be charged while using?
Yes, Jump 600X supports pass-through charging. You can
recharge the power station while charging your device.
9