Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The following precautions are intended to prevent accidents and/or injuries to
individuals or groups. Before using the product, make sure you have read,
understood and followed all instructions and safety procedures that are
mentioned in this manual.
Before connecting the machine, make sure that the item and the power cord
are not damaged. Moreover, check if all screws and cables are tightened
securely. Such action will also help you to detect possible hydraulic oil and
fluid leaks.
Always place the unit on a straight and stable surface!
When pressure is applied, the chosen surface must be the ideal one for the
occasion. Moreover, you should also have a look at the legal regulations for
the prevention of accidents, the guidelines and requirements that currently
exist in your place of residence. In addition, other regulations must also be
taken into consideration: The Health and Safety at Work Act and other
accident prevention measures for motorized equipment.
● Risk of burns and crushing injuries! Never touch the heating
plates or put your fingers next to both materials.
● Make sure the press is always clean and free of dust.
● Always connect the plug to the appliance first, then plug it
into the power outlet.
● Before disconnecting the unit from the power supply, make
sure that the device is switched off.
● The product is supplied with a power cord. Without proper
grounding, do not atempt to charge the unit with other
cables or products other than those recommended by the
manufacturer.
● Always turn the power supply off when the press is not in
use.
● If the main item is damaged, avoid using it completely. If
you need to repair the machine, talk to a specialist or contact
our customer service professionals by email at
info@graveda.de .
● Risk of crushing!
● Risk of burns!
Precautions
Page 22
Werbung
