VS 01442-001 Montageanleitung Seite 6

1
(1)
(3)
Preparing to assemble the supporting
post (Fig. 1)
The table top is supplied with pre-assembled frame (1) and
leg clips (1) Carefully lie the table on a soft surface (to
avoid scratches) with the table top facing downwards (two
people required). Then remove all four screws (3) from the
frame.
Important! Provide protection against scratches
(e.g. blanket)
6
(2)
(3)
2
(1)
(3)
(4)
Assembling the supporting post (Fig. 2)
Position the supporting post (2) precisely on the frame. The
two screws (4) that inhibit rotation must be facing the
middle of the table. Use the four screws (3) to fix the post
(2) to the table frame.
Caution! Do not confuse the inside and outside faces
of the supporting post.
(2)
(2)
(3)