Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Additional safety rules
Always keep in mind that:
- the machine must be switched off and disconnected from the power supply during maintenance and repairs,
- clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
2. Characteristics and applications
Motor power (two speeds)
Reduction gearing in oil bath
Saw blade diameter
Speed
Vice opening
Weight
Subject to change.
Sawing capacity
90°
45° DX
3. Instructions for using this machine
Read the safety rules carefully and always observe them. Examine the applications of this machine and
beware of possible risks.
Always wear safety glasses.
4. Machine dimensions, transport, installation, dismantling
4.1 Machine dimensions
See Figure 1
4.2 Transportation of your machine
To move the machine, the machine needs to be moved in its own packing, use a forklift truck or sling it with
straps as illustrated in figure 2.
4.3 Minimum requirements for housing the machine
Main voltage and frequency must comply with the machine's motor requirements.
Environment temperature should fall within -10° C to +50° C.
Relative humidity cannot be over 90%.
30
65
25
60
-22-
225 mm
65
80 x 55
60
65 x 50
0.75 kW
1:27
52 RPM
80 mm
60 kg
Werbung
