Klarstein BORNHOLM SMART Bedienungsanleitung Seite 28

EN
28
SETUP AND OPERATION
Note: Operation via the display is described below.
The device beeps as soon as the mains plug is plugged into the socket. The device
is now in standby mode and displays the WiFi symbol
temperature in °C.
Start heating process
Press the on/off button
heating mode symbol
which means the device is heating with low power.
Mode setting
Press the up and down
different modes are displayed:
Low heat output
High heat output
Anti-frost mode
Temperature adjustment
Press the settings button
modes. When the digital display
buttons to set the temperature. The adjustable temperature range is between 5 °C
and 45 °C.
Note: In anti-frost mode, the temperature cannot be adjusted.
Timer setting
To set the timer, press the settings button
press the up and down
period of between 1-24 hours. The digits will flash during setting, then the screen
will revert back to heating mode. The timer symbol on the screen indicates that the
timer has been set. The device heats up until the set time has elapsed.
to start the heating process. When first started, the
and the symbol for low heating power
buttons to set the heating mode. The symbols of the
to adjust the temperature of one of the two heating
flashes, press the up
. When the timer symbol
buttons to set the time. The timer can be set to a
and the current room
are displayed,
and down
flashes,