Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Process
1. Open the factory package and carefully take the appliance out.
2. Take out the packing paper sheet from the end of device.
3. Take out one pair of mounting Brackets. These adjustable brackets allow direct ceiling or wall
mount, and come with preset angle options of parallel, 15°, 30°, 45° and height 165mm.
4. The correct installation process, as per the diagram above, select the location on the ceiling by
locating the stud or structural beams to ensure secure fastening of the device, whilst observing the
minimum clearances from the floor and other objections.
Werbung
