Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation procedure
Installation of several
glass-ceramic hobs
Connecting the hob to the mains
Worktop must be placed absolutely horizontal.
Suitably protect the edges of the cut aperture.
Screw the attached fixing elements 4 with attached screws
4 on the right and the left panel of the hob to the already
prepared hole in the opening.
Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
Insert the hob into the cut aperture.
Press the hob firmly towards the worktop from above.
When installing several glassceramic hobs it is necessary
to separate them with intermediary short strip
(to be purchased separately - 286696).
Connections may be carried out by a qualified technician only.
The earthing protection must comply with the standing
regulations.
Connection brackets are accessible when the bracket lid is
opened.
Prior any attempted connection check that the voltage
indicated on the rating plate is in line with your home power
supply.
The rating plate is located underneath the appliance.
27
Werbung
Inhaltsverzeichnis
