LD Systems LDEB82G3WMB Bedienungsanleitung

USER´S MANUAL LDEB82/102/282G3WMB
Swivel wall & ceiling mount for Stinger® G3
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when mounting the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/
pdf/Manufacturers-Declarations-LDSYSTEMS_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach
/ Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be
treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable
economic activity.
LDEB82G3WMB (SUITABLE FOR LDEB82G3, LDEB82AG3)
LDEB102G3WMB (SUITABLE FOR LDEB102G3, LDEB102AG3)
LDEB282G3WMB (SUITABLE FOR LDEB282G3, LDEB282AG3)
Screw the U-bracket of the desired Stinger G3 speaker in a suitable position to a load-bearing wall or ceiling (A). Use suitable
screws and plugs etc. to ensure secure mounting. Remove the M8 screws on the top and bottom of the speaker and lift the
speaker into the bracket so that the thread locations in the speaker and the holes in the bracket are aligned. Use the supplied
M8 screws and washers as shown in the figure below (B, place rubber washers between the bracket and the speaker),
adjust dispersion angle as desired and tighten the screws with a suitable tool (C).
A
A
For further instructions, please check out the detailed online manual in the download area of this product at:: www.ld-systems.com
B
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SPECIFICATIONS
Model name: LDEB82G3WMB
Type: PA Loudspeaker Accessories
Part: Wall/Ceiling Mount Bracket
Suitable for: LDEB82G3, LDEB82AG3
Material: Steel
Surface: Powder Coated
Colour: Black
Max. Load 12 kg
Dimensions (W x H x D): 60mm x 460mm x 170mm
Weight: 1.1 kg
Model name: LDEB102G3WMB
Type: PA Loudspeaker Accessories
Part: Wall/Ceiling Mount Bracket
Suitable for: LDEB102G3, LDEB102AG3
Material: Steel
Surface: Powder Coated
Colour: Black
Max. Load 15 kg
Dimensions (W x H x D): 60mm x 535mm x 170mm
Weight: 1.2 kg
Model name: LDEB282G3WMB
Type: PA Loudspeaker Accessories
Part: Wall/Ceiling Mount Bracket
Suitable for: LDEB282G3, LDEB282AG3
Material: Steel
Surface: Powder Coated
Colour: Black
Max. Load 21 kg
Dimensions (W x H x D): 60mm x 763mm x 170mm
Weight: 1.5 kg
EN