Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Wii™ 2in1 Charger
Many thanks for purchasing this Brooklyn™ product. Before using the device, please read these operating instructions
carefully and familiarize yourself with the individual functions.
Contents:
• 1x Double Charging Station for Wii™
Remotes
• 2x 750mAh NiMH Battery Pack
• 1x Manual
Getting started
1.
Please remove any packaging material from the Brooklyn™ 2in1 Charger.
2.
Switch off your Nintendo® Wii™ Console and pull the plug from the socket and the
Wii Console.
3.
Connect the Wii™ Console to the Brooklyn 2in1 Charger! (see fi gure 1).
4.
Connect the power adapter to the 2in1 Charger (see fi gure 2) and reconnect the
power plug to the socket!.
5.
Use the switch at the backside of the 2in1 Charger to switch it on
(see fi gure 2).
6.
Switch on your Nintendo® Wii™ Console.
Charging procedure
Important: charge the batteries for 12 hours before using for the fi rst time! Please note
that NiMH batteries must be charged completely approx. three to fi ve times before they
reach their full capacity.
1.
Remove the battery cover of the Wii™ Remote and remove the batteries.
2.
Insert the battery packs into the battery compartment of your Wii™ Remote and place them into the loading device of
your Brooklyn 2in1 Charger.
3.
The loading device light red during charging.
4.
The loading device light switches to blue when the battery pack is fully charged.
You also have the possibility to charge 2x AA rechargeable battery without a Wii™ Remote.
Make sure the Wii™ 2in1 Charger is switched on and insert the rechargeable batteries into
the battery compartment (see fi gure 3) of the Wii™ 2in1 Charger.
Please pay attention on the polarity when inserted the batteries into the battery compartment!
The charging-LED lights red during charging, when the batteries are fully recharged, the
charging-LED lights blue.
Please note the charging time extends when you charge your Wii™ Remotes the same time!
Troubleshooting
Problem:
The loading device do not charge, the LEDs are off.
Solution:
Please make sure the Brooklyn 2in1 Charger is switched on! (see fi gure 2)
Problem:
The rechargeable batteries in the separate loading device do not charge – the charging-LED is switched off.
Solution:
Make sure you inserted the rechargeable batteries correctly. (Polarity!)
Problem:
The rechargeable batteries in the separate loading device do not charge – the charging-LED switches to blue.
Solution:
Either you inserted regular batteries – PLEASE REMOVE IMMEDIATELY!!! – or the rechargeable batteries
already fully charged.
Please note that the battery packs and the charger may not be disposed of with the household trash!
Customer service:
VIDIS GmbH • Rungedamm 37
D-21035 Hamburg • Germany
1
Features:
• Charges one or two Wii™ Remotes
• Charges also when Wii™ Console
is switched off.
• Wii™Vertical Stand
• Storage case for one
Nunchuk™
Tel.:
+49-40-514840-48
Fax:
+49-40-514840-40
E-Mail:
service@vidis.com
Internet: www.vidis.com
FOR WII™
Werbung
