Getting The Password For Authentication; Upgrade Procedures; Upgrading The Software Programme And The Map Database - Pioneer T1000-25817 Aktualisierung Und Betriebsanleitung

Instructions for upgrading
Getting the password for
authentication
For upgrade, a unique password issued online
is necessary. Access the website with your
computer and get your password.
The following information is required.
! Media Number (MEDIA NUMBER) shown
on the Media Number Card
(MEDIA NUMBER CARD) printed on the in-
side of the packaging of this product
! Device Number (DEVICE NUMBER) of your
navigation system
1 Access on the following website to
issue your password.
http://www.pioneer.eu/UnlockNavgate
For issuing the password, follow the instruc-
tion on the website.
2 Record the password that you received.
You need to input this password accurately.
Write down your password to avoid mis-
takes.

Upgrade procedures

! NEVER stop the engine of your vehicle or
turn off the power supply to the navigation
system until the installation is completed.
Turning the power off during upgrade pro-
cess causes a malfunction or failure of the
navigation system.
! No functions are available during upgrade
process.
Upgrading the software
programme and the map database
This section describes the upgrade proce-
dures for your navigation system.
p The upgrade takes approximately 30 min-
utes in total.
1 Park your vehicle in a safe place and
apply the handbrake.
2 Insert the upgrade microSD card into
the SD card adapter (for AVIC-F30BT and
AVIC-F40BT).
3 Insert the upgrade microSD card into
the SD card slot.
The message confirming whether or not to
start the update will appear.
Chapter
05
19
Engb