Creality CR-10 Benutzerhandbuch Seite 9

Install the Rack
Install decoration strip
Install decoration belt into the
notch, starting from one end.
*The decoration Strip is available in various colours. The pictures above are for
reference only. *CR- 10mini without Decoration Strip.
Attach the Bracket with
two thumb screws
Cut off the excess material
with the diagonal pliers.
Y Stepper and Limit Switch
Extruder (E) Stepper
X Stepper and Limit Switch
Z Stepper and Limit Switch
Attach Spool Holder
with included Nuts
9
Finished
Attach the Decorative Trim to all
parts needing to be decorated.