Dismounting, Return And Disposal - WIKA CS4R Betriebsanleitung

12. Dismounting, return and disposal

12. Dismounting, return and disposal
Personnel: Skilled electrical personnel
Tools: Screwdriver
12.1 Dismounting
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
The dismounting of the instrument may only be carried out by skilled
personnel.
▶
Remove the universal controller once the system has been isolated from
power sources.
WARNING!
Physical injury
When dismounting, there is a danger from aggressive media and high
pressures.
▶ Observe the information in the material safety data sheet for the
corresponding medium.
▶
Dismount the universal controller when there is no pressure.
12.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable transport
packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our local
website.
12.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
WIKA operating instructions model CS4R
EN
41