2.2
Intended use
This product may only be used in sealed heating systems (as per EN 12828)
with a heating capacity of up to 200 kW (G1¼) or 350 kW (G1½).
The product may only be used for the following media:
•
Water
•
Water/glycol mixtures with a maximum glycol concentration of 50 %
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
•
All directives, standards and safety regulations applicable at the installa-
tion site of the product
•
All conditions and data specified for the product
•
The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.
When using the product, perform all work and all other activities in conjunc-
tion with the product in compliance with the conditions specified in the oper-
ating instructions and on the nameplate, as well as with all directives, stand-
ards and safety regulations applicable at the installation site of the product.
2.3
Predictable incorrect application
The product must never be used in the following cases and for the following
purposes:
•
Operation when the discharge opening is shut off
•
Use with adherent, corrosive or flammable fluids
•
Operation with media that have an adverse effect on the proper operation
of the product
•
Temperatures and pressures in excess of or below the permissible tem-
peratures and pressures
Information on safety
KSG Magnum
EN
4