Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EB2 - Expansion Board 2
5
Start-up
NOTES
Siemens AG 6SE7087-6NX84-0KC0
SIMOVERT MASTERDRIVES
06.98
After installation of the EB2 terminal expansion board has been completed, an
automatic self-test is carried out when the basic unit (converter/inverter) is
powered up.
If you want to use an input or output of the optional board, you have to activate
the respective function block.
Please bear in mind that if two EB2 terminal expansions are installed, each
board is provided with its own parameter set.
Please refer to the Compendium for further information regarding
parameterization of the EB2 terminal expansion board.
Operating Instructions
Start-up
5-1
Werbung
