Metcal CV-PS5200 Bedienungsanleitung Seite 11

STEP 2: ADDING CV TIP PART NUMBERS TO TIP RESTRICTED LIST
NOTE: Tip part numbers can only be added to TIP RESTRICTED LIST/TIP LOCKOUT setup screen when
in ADMINISTATOR/ADMIN/SUPERVISOR MODE
NOTE: The tip that is currently inserted into the CV hand-piece will be the tip part number to add to
the restricted tip list. There are 12x fields for 12x CV tip p/n to be added to the restricted tip list
a. Insert physical CVC tip part number to add to Tip Restricted List into the CV hand-piece
b. Turn CV-PS5200 power supply ON
c. Noted CV tip part number on screen from tip ID; this is the part number available for adding to
the restricted tip list.
d. Press setup button to enter SETUP MODE and enter 4 digit ADMIN PASSWORD using the [-][+]
buttons
e. Press TIP RESTRICTED LIST button (tip icon)
f. Press the [+] button to add CV tip part number to the restricted tip list
g. Press the LOCK button to enable tip lockout mode
h. Exit tip restricted list screen; Exit setup mode
TIP RESTRICTED LIST; 12x fields for 12x tip p/n
INSERT CV TIP INTO CV HAND-PIECE
TIP RESTRICTED
LIST/TIP
LOCKOUT
P/N FROM TIP
BUTTON
ID ON THE
CARTRIDGE
SHAFT
Press [+] to add tip p/n in handle to 'approved' list
Press lock button to 'lock' to enable tip lockout mode
IMPORTANT: Tip list changes will NOT save
unless exiting to FUNCTION
SCREEN
11