Proper Use; Technical Data - Stanley SG 2400 Basic Anleitung

G
B
there is a correlation between emission and immission
levels, the values are not a reliable basis for deciding on
any additional precautions which may be needed. Factors
influencing the actual user immission level include the
properties of the work area, other sound sources etc.,
the number of machines and other processes in the
vicinity, as well as the time span in which the operator
is subjected to the noise. Also, the permitted immission
level can vary from country to country. Nevertheless,
with this information the user is able to make a better
assessment of the dangers and risks involved.
- Never use faulty or damaged electrical equipment (this
also applies to extension cables and plug connections).
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.

3. Proper use

The device is designed for applications operated with a
230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to provide electric
tools and light sources with electricity. When using the
device with household appliances, please check their
suitability in accordance with the relevant manufacturer's
instructions. In case of doubt, ask an authorized dealer
of the respective appliance. The machine is to be used
only for its prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries of
any kind caused as a result of this.

4. Technical data

SG 2400 Basic
Generator type:
Protection type:
Continuous rated power Prated (S1):
Maximum power Pmax :
Rated voltage Urated:
Rated current Irated:
Frequency Frated:
Drive engine design:
Single-cylinder forced air-cooled 4-stroke OHV
Displacement:
Fuel type:
Tank capacity:
Engine oil:
Consumption at 2/3 load:
Weight:
Guaranteed sound power level L
Power factor cos φ:
Power class:
Max. temperature:
Max. altitude (above mean sea level):
Spark plug:
Operating mode S1 (continuous operation)
The machine can be continuously operated with the
quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with the
quoted power output. Afterwards the machine must be
stopped for a while to prevent it from overheating
5. Layout
1 Tank indicator
2 Fuel cap
3 230 V~ socket-outlets
4 Motor
5 Earth connection
6 Overload cut-out
7 Voltmeter
6
Synchronous
2* 230 V~
Normal unleaded petrol
o
Appox.0.6 l (15W40/<0 C: 5W30)
: 96 dB(A)
WA
LD F7RTC/ F6TC
IP 23M
2.1 kW
2.4 kW
9.1 A
50 Hz
3
196 cm
15 l
1.5 L/h
37 kg
1
G1
40 °C
1000 m